One Side Of The Hoverboard Not Working (Do This To Fix)

When One Side Of The Hoverboard Not Working, it’s usually because of the gyroscope mounted next to the wheel. Has one side of your hoverboard ever failed to balance? Is one of your hoverboard’s wheels broken? Have you repeatedly turned on and off the hoverboard, but no matter what you do, one side will not balance?

You could have even attempted to calibrate your hoverboard, which is what folk’s online claim can fix it. It’s time to look more closely at the issue if you have tried everything listed above and still can’t get your hoverboard wheel to balance. You can follow the instructions in this tutorial to solve the issue.

How To Fix One Side Of The Hoverboard Not Working?

Step 1: Recalibrate

I am aware of that. I already said it. However, you must perform calibration if you haven’t already. The most typical solution to a hoverboard that won’t balance is this. Switch to step 2 if it doesn’t.

Step 2: Check For Loose Wires

Contrary to popular belief, a hoverboard’s inside is unusual. It is constructed of a battery, wires, and various computer chips. Sometimes these internal wires come untied, resulting in a disconnect that prevents a hoverboard from maintaining equilibrium.

Grab a Phillips head screwdriver and open the hoverboard to see if there are any loose wires inside. By carefully looking inside, check the cables inside to determine if anything is disconnected. Use your eyes, and watch for any frayed or exposed battery wires. Nothing loose was discovered. Go to step 3 now.

Step 3: Replace Gyroscope

Starting tossing pieces downfield will be the most typical winning play at this time in the game. The gyroscope next to the wheel on the side where the hoverboard won’t balance is typically to blame. However, knowing the issue and correcting it are two different things.

Only a few businesses produced hoverboard circuit boards in their early years. This made it simple to locate a compatible gyroscope, making it simple to balance the unbalanced side. Your hoverboard should work again if you can find an identical (I should stress this word: IDENTICAL) gyroscope and replace it.

These days it is hard to locate an exact match, so I advise against changing the gyroscope. An unsuitable replacement for the old gyroscope could result in issues like smoke and fire. Please continue to step 4 since I much enjoy it.

Step 4:  Replace Circuit Boards

I advise getting a replacement circuit board kit rather than investing the time to replace the defective component (assuming you can even locate it). You may replace every circuit board inside with this kit.

The circuit board kits used inside hoverboards come in a variety of styles. The kit configuration is greatly influenced by the year the hoverboard was manufactured because technology is always changing. Opening your hoverboard and comparing the kit inside to those in our store is the best method to ensure you’re purchasing the right kit.

In principle, they should function if they have a similar appearance (3-pc kits vs. 2-pc kits, etc.). Embarrassed or unsure of how to swap out the circuit boards? To make it simpler for you, we created a how-to video for replacing the hoverboard circuit boards.

We found that it fixes roughly 90% of all hoverboards that no longer balance on one side, so hopefully, this step helped you. Otherwise, proceed to step 5. 

Step 5: Replace Wheel

If all else fails, we’ve discovered that the final action we take resolves the remaining hoverboard issues. Replace the wheel on the hoverboard’s unbalanced side, and you should be good to go.

It sounds simpler than it is right now, as appears to be the case with hoverboard components. Once more, in the early years of hoverboards, only a small number of companies produced hoverboard wheels (also known as motors).

There are numerous kinds of connectors and ends, and safety regulations have evolved through time. By 2022, the ends will either be firm and black or soft and green. They are, regrettably, incompatible with one another.

Just be aware that you will need to open up your hoverboard and determine which wheel type you have if you decide to replace the wheel on your hoverboard. After changing it, you should be good to go if you order the same wheel size and style as your original.

Step 6:  Buy New Hoverboard

Sometimes it isn’t worth the time, effort, or money to fix a malfunctioning hoverboard. Then it might be time to give up and purchase a new hoverboard.

Conclusion 

Don’t worry or fret if One Side Of The Hoverboard Not Working and your gadget can’t balance. It is most likely your gyroscope that is malfunctioning. Open the device up to see what kind of gyroscope (male or female) your hoverboard employs. Then, place an order for a replacement on Amazon (preferred) or AliExpress, and your hoverboard will soon be back in full working order.

Relevant Questions